Description1/2 inch DC 12V 250mA Electric Solenoid Valve Flow SwitchSpecifications :Current250mAVoltage12V DCPressure0-0.8MPaOperation ModeNormally closedFluid Temperature1-100°CMaximum Size84 x 53 x 41mmDiameter of Screw19mmLength of Screw17mmDiameter of Connector14mmValve TypeDiaphragm(operated by servo)UsageWater and low viscosity fluids ..

Description This DC Motor Speed Controller allows controlling the direction of a DC motor using a Pulse- Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 0%-100%.The motor speed controller can easily provide a continuous current of 3A to your DC motor or other DC load. Operating instruction:  ..

DescriptionDIP switch with 4 individual switch positions. The pins have .1"(2.54mm) spacing - fits great into a breadboard! Works great as general control switches. Features:4 individual switch positions2.54mm pin spacingGeneral control switchesPackage includes:1 x DIP Switch - 4 Position..

DescriptionDIP switch with 8 individual switch positions. The pins have .1"(2.54mm) spacing - fits great into a breadboard! Works great as general control switches.Features:8 individual switch positions2.54mm pin spacingGeneral control switchesPackage includes:1 x DIP Switch - 8 Position..

DescriptionDPDT ON-OFF-ON Switch..

DescriptionFrontier Digital Timer programmable Time Switch / controller TM-619-2-h - With Lcd-4 PinFeatures:17 ON / OFF programs can be set per dayEasy to replace batteryOption to select Day/Days of the week on which the programmed functions to be performedLED power indicatorManual over ride switchLCD on screen displays ON and OFF switching statusW..

DescriptionIRF520 MOSFET Driver Load Switch Module Specifications:Dimensions: 33 * 24mmWeight: 10gVoltage: 3.3V, 5VPorts: Digital LevelOutput load voltage: 0-24VOutput load current: <5A (1A or more need to add heat sink)Platform: Arduino, MCU, ARM, Second, product characteristicsUsing original IRF520 power MOS, you can adjust the output PWMArdui..

DescriptionDescription: Pull push type, linear motion, open frame, plunger spring return, DC solenoid electromagnet.DC Solenoid Electromagnet mainly used in vending machines, transport equipment, office facility  household appliance, mechanical, etc.Solenoids of this category work externally through pulling pushing in plunger.When energiz..

Description This is a simple LED-illuminated tactile button with a clear cap. It's just like a basic tactile button, but it lights up blue! So now you can get visual feedback, or light up your project. These have a 12mm body and are rated for 50mA...

DescriptionThis is a simple LED-illuminated tactile button with a clear cap. It's just like a basic tactile button, but it lights up green! So now you can get visual feedback, or light up your project. These have a 12mm body and are rated for 50mA...

Description This is a simple LED-illuminated tactile button with a clear cap. It's just like a basic tactile button, but it lights up White. So now you can get visual feedback, or light up your project. These have a 12mm body and are rated for 50mA..

Description This is a simple LED-illuminated tactile button with a clear cap. It's just like a basic tactile button, but it lights up red! So now you can get visual feedback, or light up your project. These have a 12mm body and are rated for 50mA..

DescriptionThis is the Magnetic Door Switch Set, a small reed switch assembly specifically designed to alert you when doors, drawers, or any other aperture opens.These types of switches are primarily used in home security systems. One half of the assembly set on a window or door frame and the other attached to the window or door itself. When the sw..

DescriptionThis Micro Switch with Roller Lever is a small snap action switch with a round wheel at the end of a lever.The lever is used to press a tiny momentary push button. These switches can be used to create bump sensors for your robot or as limit switches for other projects. They are SPDT Single Pole Double Throw switches and can be used as NO..

DescriptionPush Buttons ..