Description1N4007 1000V 1A General Purpose Diode 1N4007 is a rectifier diode, designed specifically for circuits that need to convert alternating current to direct current. It can pass currents of up to 1 A, and have peak inverse voltage (PIV) rating of 1,000 V. 1N4007 Characteristics:Maximum Recurrent Peak Reverse Voltage 1000VMaximum RM..

DescriptionThis is 12V Zener Diode 1/2 watt rating...

Description3 Watt LED with Heatsink.Specification:3W High Power Warm White LEDLuminous flux: 200LmForward Voltage: VF3.4V (IF = 700mA TA = 25°C)Forward Current : 700mA Pulse Forward Current : 800mAViewing Angle: 120°Soldering Temperature : 265°C for 5 sec...

DescriptionThis is a 3.3V Zener Diode 1/2 watt rating This is a complete series of 1/2 Watt Zener Diode Voltage Regulators with tight limits and better operating characteristics that reflect the superior capabilities of silicon-oxide passivated junctions. All this is in an axial-lead, transfer-molded plastic package that offers ..

Description5mm Diffused Yellow LED (Pack of 25) Features: Contains 25 5mm (T-1 3/4) LEDs.In yellow casing/lens. Emits diffused, bright yellow light.Great for electronic and electrical experimentsForward Voltage: 1.9-2.0V ..

DescriptionBlue LED SMD (1206 Package) (Pack of 10 Leds)This is Blue SMD LED in 1206 package...

DescriptionDiffused Green 5mm LED (Pack of 25)Need some indicators We are big fans of these diffused green LEDs, in fact we use them exclusively in our kits. They are fairly bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to your project.Pack of 25 diffused green LEDs5mm diam..

DescriptionNeed some indicators We are big fans of these diffused red LEDs, in fact we use them exclusively in our kits. They are fairly bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to your project.Pack of 25 diffused red LEDS5mm diameter660 nm wavelength1.85-2.5V Forward ..

DescriptionDiffused 5mm tri-color LEDs with separate red, green and blue LED chips inside! Nice indicator, and fun to color-swirl. 60 degree viewing angle. We like diffused RGB LEDs because they color mix inside instead of appearing as 3 distinct LEDs. These are Common-Anode type which means you connect one pin to 5V or so and then tie the oth..

DescriptionGreen LED SMD (1206 Package) Pack of 10 LedsThis is Green SMD LED in 1206 package. ..

DescriptionGreen LEDs (Pack of 5)Description:5 mm diameter660 nm wavelength1.85-2.5V Forward Voltage, at 20mA current250 mcd typical brightness..

DescriptionThis is diffused 10 mm package Green color LED..

DescriptionThis is diffused 10 mm package Red color LED ..

DescriptionThis is diffused 10 mm package Yellow color LEDA light-emitting diode (LED) is a two-lead semiconductor light source. It is a p–n junction diode that emits light when activated. When a suitable current is applied to the leads, electrons are able to recombine with electron holes within the device, releasing energy in ..

DescriptionL14F1 - Phototransistor  Photodarlington, TO-18 Transistor Polarity: NPN Wavelength Typ: 940nm Power Consumption: 300mW Viewing Angle: 8° Transistor Case Style: TO-18 No. of Pins: 3 SVHC: No SVHC  Current Ic Typ: 7.5mA Fall Time tf: 50µs Half Angle: 15° L..