DS18B20 Water-Proof Temperature Sensor Probe
Product Description
This is a sealed (waterproof) and pre-wired digital temperature probe, based on DS18B20, 1-wire digital temperature sensor from Maxim IC, providing data in degree Centigrade with 9 to12 bit precision over the range of operation (-55C to 125C). This probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. Because they are digital, you don't get any signal degradation even over long distances!
Each DS18B20 IC has been assigned unique 64-Bit Serial Number at the time of manufacturing - allowing for a large number of such sensors to be used on one data bus. Thus a single microcontroller can receive data from many DS18B20s distributed over a large area. This feature could be handy in various data-logging and temperature control applications.
DS18B20 has an alarm function which can be used for setting user-programmable upper and lower trigger points. It has 1-Wire® bus communication feature, requiring only one data line (and ground) for communication with microprocessor. The DS18B20 has accuracy of ±0.5°C over the range of -10°C to +85°C.
The only downside is they use the Dallas 1-Wire protocol, which is somewhat complex, and requires a bunch of code to parse out the communication. When using with microcontroller put a 4.7k resistor to sensing pin, which is required as a pullup from the DATA to VCC line.
Cable specs:
- Stainless steel tube 6mm diameter by 30mm long
- Uses DS18B20 temperature sensor
- Cable is 4mm diameter and 1 Meter Long
- Three wires - Red connects to 3-5V, Black connects to ground and White is data.
DS18B20 Sensor Technical specs:
- Usable temperature range: -55 to 125°C (-67°F to +257°F)
- 9 to 12 bit selectable resolution
- Uses 1-Wire interface- requires only one digital pin for communication
- Unique 64 bit ID burned into chip
- Multiple sensors can share one pin
- ±0.5°C Accuracy from -10°C to +85°C
- Temperature-limit alarm system
- Query time is less than 750ms
- Usable with 3.0V to 5.5V power/data
When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.
The total time it takes to receive your order is shown below:
The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.
Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.
Shipping from your local warehouse is significantly faster. Some charges may apply.
In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!